pub enum WhirlpoolError {
Show 58 variants InvalidEnum = 6_000, InvalidStartTick = 6_001, TickArrayExistInPool = 6_002, TickArrayIndexOutofBounds = 6_003, InvalidTickSpacing = 6_004, ClosePositionNotEmpty = 6_005, DivideByZero = 6_006, NumberCastError = 6_007, NumberDownCastError = 6_008, TickNotFound = 6_009, InvalidTickIndex = 6_010, SqrtPriceOutOfBounds = 6_011, LiquidityZero = 6_012, LiquidityTooHigh = 6_013, LiquidityOverflow = 6_014, LiquidityUnderflow = 6_015, LiquidityNetError = 6_016, TokenMaxExceeded = 6_017, TokenMinSubceeded = 6_018, MissingOrInvalidDelegate = 6_019, InvalidPositionTokenAmount = 6_020, InvalidTimestampConversion = 6_021, InvalidTimestamp = 6_022, InvalidTickArraySequence = 6_023, InvalidTokenMintOrder = 6_024, RewardNotInitialized = 6_025, InvalidRewardIndex = 6_026, RewardVaultAmountInsufficient = 6_027, FeeRateMaxExceeded = 6_028, ProtocolFeeRateMaxExceeded = 6_029, MultiplicationShiftRightOverflow = 6_030, MulDivOverflow = 6_031, MulDivInvalidInput = 6_032, MultiplicationOverflow = 6_033, InvalidSqrtPriceLimitDirection = 6_034, ZeroTradableAmount = 6_035, AmountOutBelowMinimum = 6_036, AmountInAboveMaximum = 6_037, TickArraySequenceInvalidIndex = 6_038, AmountCalcOverflow = 6_039, AmountRemainingOverflow = 6_040, InvalidIntermediaryMint = 6_041, DuplicateTwoHopPool = 6_042, InvalidBundleIndex = 6_043, BundledPositionAlreadyOpened = 6_044, BundledPositionAlreadyClosed = 6_045, PositionBundleNotDeletable = 6_046, UnsupportedTokenMint = 6_047, RemainingAccountsInvalidSlice = 6_048, RemainingAccountsInsufficient = 6_049, NoExtraAccountsForTransferHook = 6_050, IntermediateTokenAmountMismatch = 6_051, TransferFeeCalculationError = 6_052, RemainingAccountsDuplicatedAccountsType = 6_053, FullRangeOnlyPool = 6_054, TooManySupplementalTickArrays = 6_055, DifferentWhirlpoolTickArrayAccount = 6_056, PartialFillError = 6_057,
}

Variants§

§

InvalidEnum = 6_000

6000 - Enum value could not be converted

§

InvalidStartTick = 6_001

6001 - Invalid start tick index provided.

§

TickArrayExistInPool = 6_002

6002 - Tick-array already exists in this whirlpool

§

TickArrayIndexOutofBounds = 6_003

6003 - Attempt to search for a tick-array failed

§

InvalidTickSpacing = 6_004

6004 - Tick-spacing is not supported

§

ClosePositionNotEmpty = 6_005

6005 - Position is not empty It cannot be closed

§

DivideByZero = 6_006

6006 - Unable to divide by zero

§

NumberCastError = 6_007

6007 - Unable to cast number into BigInt

§

NumberDownCastError = 6_008

6008 - Unable to down cast number

§

TickNotFound = 6_009

6009 - Tick not found within tick array

§

InvalidTickIndex = 6_010

6010 - Provided tick index is either out of bounds or uninitializable

§

SqrtPriceOutOfBounds = 6_011

6011 - Provided sqrt price out of bounds

§

LiquidityZero = 6_012

6012 - Liquidity amount must be greater than zero

§

LiquidityTooHigh = 6_013

6013 - Liquidity amount must be less than i64::MAX

§

LiquidityOverflow = 6_014

6014 - Liquidity overflow

§

LiquidityUnderflow = 6_015

6015 - Liquidity underflow

§

LiquidityNetError = 6_016

6016 - Tick liquidity net underflowed or overflowed

§

TokenMaxExceeded = 6_017

6017 - Exceeded token max

§

TokenMinSubceeded = 6_018

6018 - Did not meet token min

§

MissingOrInvalidDelegate = 6_019

6019 - Position token account has a missing or invalid delegate

§

InvalidPositionTokenAmount = 6_020

6020 - Position token amount must be 1

§

InvalidTimestampConversion = 6_021

6021 - Timestamp should be convertible from i64 to u64

§

InvalidTimestamp = 6_022

6022 - Timestamp should be greater than the last updated timestamp

§

InvalidTickArraySequence = 6_023

6023 - Invalid tick array sequence provided for instruction.

§

InvalidTokenMintOrder = 6_024

6024 - Token Mint in wrong order

§

RewardNotInitialized = 6_025

6025 - Reward not initialized

§

InvalidRewardIndex = 6_026

6026 - Invalid reward index

§

RewardVaultAmountInsufficient = 6_027

6027 - Reward vault requires amount to support emissions for at least one day

§

FeeRateMaxExceeded = 6_028

6028 - Exceeded max fee rate

§

ProtocolFeeRateMaxExceeded = 6_029

6029 - Exceeded max protocol fee rate

§

MultiplicationShiftRightOverflow = 6_030

6030 - Multiplication with shift right overflow

§

MulDivOverflow = 6_031

6031 - Muldiv overflow

§

MulDivInvalidInput = 6_032

6032 - Invalid div_u256 input

§

MultiplicationOverflow = 6_033

6033 - Multiplication overflow

§

InvalidSqrtPriceLimitDirection = 6_034

6034 - Provided SqrtPriceLimit not in the same direction as the swap.

§

ZeroTradableAmount = 6_035

6035 - There are no tradable amount to swap.

§

AmountOutBelowMinimum = 6_036

6036 - Amount out below minimum threshold

§

AmountInAboveMaximum = 6_037

6037 - Amount in above maximum threshold

§

TickArraySequenceInvalidIndex = 6_038

6038 - Invalid index for tick array sequence

§

AmountCalcOverflow = 6_039

6039 - Amount calculated overflows

§

AmountRemainingOverflow = 6_040

6040 - Amount remaining overflows

§

InvalidIntermediaryMint = 6_041

6041 - Invalid intermediary mint

§

DuplicateTwoHopPool = 6_042

6042 - Duplicate two hop pool

§

InvalidBundleIndex = 6_043

6043 - Bundle index is out of bounds

§

BundledPositionAlreadyOpened = 6_044

6044 - Position has already been opened

§

BundledPositionAlreadyClosed = 6_045

6045 - Position has already been closed

§

PositionBundleNotDeletable = 6_046

6046 - Unable to delete PositionBundle with open positions

§

UnsupportedTokenMint = 6_047

6047 - Token mint has unsupported attributes

§

RemainingAccountsInvalidSlice = 6_048

6048 - Invalid remaining accounts

§

RemainingAccountsInsufficient = 6_049

6049 - Insufficient remaining accounts

§

NoExtraAccountsForTransferHook = 6_050

6050 - Unable to call transfer hook without extra accounts

§

IntermediateTokenAmountMismatch = 6_051

6051 - Output and input amount mismatch

§

TransferFeeCalculationError = 6_052

6052 - Transfer fee calculation failed

§

RemainingAccountsDuplicatedAccountsType = 6_053

6053 - Same accounts type is provided more than once

§

FullRangeOnlyPool = 6_054

6054 - This whirlpool only supports full-range positions

§

TooManySupplementalTickArrays = 6_055

6055 - Too many supplemental tick arrays provided

§

DifferentWhirlpoolTickArrayAccount = 6_056

6056 - TickArray account for different whirlpool provided

§

PartialFillError = 6_057

6057 - Trade resulted in partial fill

Trait Implementations§

§

impl Clone for WhirlpoolError

§

fn clone(&self) -> WhirlpoolError

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for WhirlpoolError

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Display for WhirlpoolError

§

fn fmt(&self, __formatter: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Error for WhirlpoolError

1.30.0 · source§

fn source(&self) -> Option<&(dyn Error + 'static)>

Returns the lower-level source of this error, if any. Read more
1.0.0 · source§

fn description(&self) -> &str

👎Deprecated since 1.42.0: use the Display impl or to_string()
1.0.0 · source§

fn cause(&self) -> Option<&dyn Error>

👎Deprecated since 1.33.0: replaced by Error::source, which can support downcasting
source§

fn provide<'a>(&'a self, request: &mut Request<'a>)

🔬This is a nightly-only experimental API. (error_generic_member_access)
Provides type-based access to context intended for error reports. Read more
§

impl FromPrimitive for WhirlpoolError

§

fn from_i64(n: i64) -> Option<WhirlpoolError>

Converts an i64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
§

fn from_u64(n: u64) -> Option<WhirlpoolError>

Converts an u64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_isize(n: isize) -> Option<Self>

Converts an isize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_i8(n: i8) -> Option<Self>

Converts an i8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_i16(n: i16) -> Option<Self>

Converts an i16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_i32(n: i32) -> Option<Self>

Converts an i32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_i128(n: i128) -> Option<Self>

Converts an i128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned. Read more
source§

fn from_usize(n: usize) -> Option<Self>

Converts a usize to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_u8(n: u8) -> Option<Self>

Converts an u8 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_u16(n: u16) -> Option<Self>

Converts an u16 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_u32(n: u32) -> Option<Self>

Converts an u32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_u128(n: u128) -> Option<Self>

Converts an u128 to return an optional value of this type. If the value cannot be represented by this type, then None is returned. Read more
source§

fn from_f32(n: f32) -> Option<Self>

Converts a f32 to return an optional value of this type. If the value cannot be represented by this type, then None is returned.
source§

fn from_f64(n: f64) -> Option<Self>

Converts a f64 to return an optional value of this type. If the value cannot be represented by this type, then None is returned. Read more
§

impl PartialEq for WhirlpoolError

§

fn eq(&self, other: &WhirlpoolError) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl PrintProgramError for WhirlpoolError

§

fn print<E>(&self)

§

impl Eq for WhirlpoolError

§

impl StructuralPartialEq for WhirlpoolError

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

§

fn implicit( self, class: Class, constructed: bool, tag: u32, ) -> TaggedParser<'a, Implicit, Self, E>

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> IntoEither for T

source§

fn into_either(self, into_left: bool) -> Either<Self, Self>

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self>
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

source§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

source§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T> ToString for T
where T: Display + ?Sized,

source§

default fn to_string(&self) -> String

Converts the given value to a String. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> ErasedDestructor for T
where T: 'static,

§

impl<T> MaybeSendSync for T